MSC N7 Engineering & CMEO Training Portal

Upcoming CMEO & N7 technical training courses.
Course Date(s) Open Seats Register
Writing Performance Work Item Workshop   
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Aug 20, 2019
8:00 AM - 3:00 PM
Registration Deadline: Aug 15, 2019

10 of 15

Use Wait List


Wait List
Contract Award Based on Best Value
Emprise Corporation – Chesapeake Office

This 2-day course shows attendees how to use the tradeoff method to select the best value offer for award. Course sections include: Intro to Best Value Source Selection; Acquisition Planning, Selecting Evaluation Factors, Evaluating Technical and Cost Proposals, Exchanges Other than Discussions, Establishing the Competitive Range and Holding Discussions, Selecting a Contractor for Award, Notifications and Debriefings, and Protests. The tradeoff approach, one of the most flexible—yet most complex—source selection approaches, is designed to yield a best value acquisition. However, many members of the acquisition community aren’t sure when and how to appropriately use this approach. You will practice the strategy of achieving best value in negotiated procurements using the tradeoff process by analyzing source selection cases and applying your learning to real-world scenarios that will make your next acquisition a success.

 

This course is designed for members of an acquisition team who expect to participate in a tradeoff source selection.

 

Aug 20, 2019 – Aug 21, 2019
8:00 AM - 5:00 PM

0 of 14

Course Full


Wait List
Estimating Work Item Workshop
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Estimating Fundamentals

 

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Aug 21, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 15, 2019

13 of 15

Use Wait List


Wait List
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Aug 26, 2019 – Aug 27, 2019
8:00 AM - 5:00 PM

0 of 16

Course Full


Wait List
PLC’s
Emprise Corporation – Chesapeake Office

Covers basic knowledge of PLC ladder logic and safe work procedures, as it pertains to reliability of maintenance procedures that minimized downtime while troubleshooting, and the ability to edit existing programs.

 

Aug 27, 2019 – Aug 29, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 27, 2019

3 of 10

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Aug 28, 2019 – Aug 29, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 22, 2019

5 of 16

Register
Government Contracting, RCA, RCM, and ENCON
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to government contracting, reliability centered maintenance, root cause analysis, and MSC’s energy conservation policies and practices.  The subject matter is considered intermediate in nature.  This course consists of the following modules:

  • Contracting Fundamentals
  • Key Contracting Roles and Responsibilities
  • Types of Government Contracts
  • Government Contracting Regulations
  • Government Contracting Competition Requirements
  • Government Acquisition Procedures
  • Publicizing Government Contracting Actions
  • Contract Solicitation Planning
  • Contract Solicitation Process
  • Contracting Source Selection Process
  • MSC N10 Procurement Request Package Requirements
  • Reliability Centered Maintenance (RCM)
  • Root Cause Analysis (RCA)
  • MSC Energy Conservation (ENCON) Program

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Government Contracting, RCA, RCM, and ENCON Rev 1.1

Sep 03, 2019 – Sep 05, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 03, 2019

18 of 20

Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Sep 03, 2019 – Sep 06, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 29, 2019

12 of 16

Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Sep 09, 2019 – Sep 13, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 05, 2019

14 of 16

Register
OSHA 10 Hour Shipyard Safety and Confined Space Entry Awareness
Emprise Corporation – Chesapeake Office

Presented by Zack Academy
The OSHA Outreach Training Program for the Maritime Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the maritime industry. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards. Through this training, OSHA helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to our nation’s productivity.
Confined Space Awareness Training is designed to provide employees with the understanding, knowledge, and skills necessary for the safe performance of duties. Employees must be trained when first assigned to duties in and around permit spaces; before there is a change in assigned duties; whenever there is a change in operations that presents a hazard; and whenever the permit-space entry procedures change. Certification of such training must be available for inspection by employees or their authorized representatives.

Sep 10, 2019 – Sep 11, 2019
8:00 AM - 3:30 PM

9 of 15

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Sep 16, 2019 – Sep 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 12, 2019

13 of 16

Register
Wartsila – Water Jets Operation and Maintenance
Emprise Corporation – Chesapeake Office

This 2-day course focuses on Wartsila Jet Drives installed on ships such as the EPF class vessels. The training ensures competencies and skills are maintained by engineers interested in learning more about the operation and maintenance of Jet Drive Propulsion systems.

 

Sep 18, 2019 – Sep 19, 2019
8:00 AM - 5:00 PM

0 of 10

Course Full


Wait List
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Sep 18, 2019 – Sep 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 12, 2019

14 of 16

Register
Maintenance Availability Planning and Management, Drydocking, and Logistics
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to MSC maintenance availability planning and management policies and practices, MSC configuration management policies and practices, MSC logistics programs, MSC drydocking policies and practices, nondestructive testing for ship repair, and DOD scrap and salvage policies and procedures.  This course consists of the following modules:

  • MSC Availability Planning
  • MSC Availability Management
  • MSC Configuration Management
  • MSC Corrective Maintenance Logistics System (CMLS)
  • ShipCLIP
  • LogiQuest
  • Nondestructive Testing
  • Scrap and Salvage
  • Drydocking
  • Weight Control and Ship’s Stability

The target audience for this course is new-hire Principal Port Engineers and Assistant Port Engineers.  This course is also appropriate for other new-hire N7 personnel, as well as experienced N7 personnel who want to attain proficiency, or refresh their proficiency in certain subject matter areas.

Maintenance Availability Planning and Management, Drydocking, and Logistics Rev 0.0

Sep 24, 2019 – Sep 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 23, 2019

20 of 20

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Sep 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 19, 2019

15 of 15

Register
Wartsila – Shaft Seals Operation and Maintenance
Wartsila Defense

 

This 1-day course will result in improvements to maintenance plans; ability to accomplish maintenance; and utilization of the results of maintenance. Tailored to Military Sealift Command (MSC) and oriented to MSC’s Maintenance Management, the course will focus on seals used in the MSC Fleet. The course objective is to provide technical information to MSC engineers that lead to improvements to MSC’s shaft seal maintenance.

 

Sep 27, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 19, 2019

5 of 20

Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Sep 30, 2019 – Oct 04, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 26, 2019

12 of 17

Register
Work Item Writing Fundamentals
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Oct 01, 2019 – Oct 03, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 26, 2019

15 of 15

Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Oct 07, 2019 – Oct 11, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 03, 2019

16 of 16

Register
Work Item Estimating Fundamentals
Emprise Corporation – Chesapeake Office

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Oct 08, 2019 – Oct 10, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 03, 2019

13 of 15

Register
Strictly Business: The Dale Carnegie Immersion Workshop – Infotech
InfoTech

This unique three-day critical thinking and problem solving seminar will help you master the skills you need to excel in today’s competitive workplace. You’ll learn to handle people more professionally and keep pace with fast-changing workplace conditions. After you complete our critical thinking training you’ll be equipped to perform as a persuasive communicator, creative workplace problem solver and intelligent risk-taker. The program emphasizes the principles of success and shows you how to put them into action every day.

Oct 08, 2019 – Oct 10, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 08, 2019

5 of 12

Register
Introduction to Military Sealift Command
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to Military Sealift Command (MSC) and its commercial-like ship operation and maintenance philosophy, policies, and business practices.  The subject matter is considered basic in nature.  This course consists of the following modules:

  • MSC Overview
  • MSC Fleet
  • MSC Shoreside Organization
  • MSC Afloat Organization
  • MSC Engineering Directorate
  • MSC Technical Authority
  • MSC Portal
  • MSC Virtual Technical Library
  • MSC Ship Operation and Maintenance Philosophy
  • MSC Life Cycle Management
  • MSC RITEMOV Overview
  • MSC Safety Management System
  • MSC Quality Management System
  • MSC TRANSALT Management
  • MSC Commodities Contracts
  • Underway Replenishment Overview

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Introduction to Military Sealift Command Syllabus Rev 1.1

Oct 15, 2019 – Oct 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 15, 2019

19 of 20

Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Oct 15, 2019 – Oct 18, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 10, 2019

11 of 16

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Oct 21, 2019 – Oct 22, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 17, 2019

15 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Oct 23, 2019 – Oct 24, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 17, 2019

15 of 16

Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Oct 28, 2019 – Nov 01, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 24, 2019

17 of 17

Register
Caterpillar – Diesel Engine Applied Failure Analysis
Emprise Corporation – Chesapeake Office

This is a course on Applied Failure Analysis on how components fail and how to conduct failure analysis.
This objective is to provide students information that will allow them to conduct failure analysis to allow identification of “road signs” for different types of failures and their root causes.  Upon completion of the course, the student should be able to complete failure analysis determination and reports, particularly in warranty/ policy settlements, on a broad range of components.
Day1: Failure Analysis Management, basic metallurgy, fractures, wear, and visual examination and reporting
Day2: Engine bearings and crankshafts, with practical exercises on both.
Day3: Engine valves, pistons, rings, liners and fasteners, with practical exercises.
Day4: Con rods and turbochargers, with practical application on both.
Day5: Two case studies allowing students to apply skills and knowledge learned in class, analyzing multiple failed components and completing failure analysis report documentation.

Oct 28, 2019 – Nov 01, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 24, 2019

13 of 20

Register
COR Training Certification
Emprise Corporation – Chesapeake Office

This 5-day course provides a concrete understanding of contracting principles that can yield numerous benefits, even for non-contracting personnel. It builds a strong foundation for future contracting work through an introduction to the Federal acquisition process by providing extensive and relevant simulations. With an emphasis on ethics training and the roles, responsibilities, and competencies of CORs and other personnel, students will gain the knowledge to achieve success. This course meets the FAC-COR Program training requirements for Level II certification and is equivalent to DAU’s COR 222; students will receive a COR CLC22 Certificate upon successful completion (80%) of a proctored 40-question test.

 

Nov 04, 2019 – Nov 08, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 01, 2019

3 of 14

Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Nov 04, 2019 – Nov 08, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 01, 2019

16 of 16

Register
MSC Regulatory Standards, Inspections, Maintenance Availability Overview, and Engineering Budgets
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to the commercial regulatory standards, inspection regimens, aviation certification, drydocking, availability planning, availability management, work item development, and work item cost estimating philosophy, policies, and business practices used by MSC.  The subject matter is considered basic in nature.  This course consists of the following modules:

  • American Bureau of Shipping Vessel Classification
  • U.S. Coast Guard Vessel Inspection and Certification
  • MSC SMART Inspections
  • MSC Onboard Condition Inspections
  • MSC Work Item Development Overview
  • MSC Work Item Cost Estimating Overview
  • Drydocking Overview
  • Government Contracting Overview
  • MSC Availability Planning Overview
  • MSC Availability Management Overview
  • Federal Budget Process
  • DOD Budget Process
  • Funding MSC Operations
  • MSC Engineering Budget Development
  • MSC Engineering Budget Execution

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

MSC Reg Stds, Insp, Maint Avail, and Engrg Budgets Syllabus

 

Nov 12, 2019 – Nov 14, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 12, 2019

19 of 20

Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Nov 12, 2019 – Nov 15, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 07, 2019

9 of 16

Register
Writing Performance Work Item Workshop
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Nov 13, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 07, 2019

15 of 15

Register
Estimating Work Item Workshop     
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Estimating Fundamentals

 

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Nov 14, 2019
12:00 AM - 12:00 AM
Registration Deadline: Nov 07, 2019

15 of 15

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Nov 18, 2019 – Nov 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 14, 2019

16 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Nov 20, 2019 – Nov 21, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 14, 2019

16 of 16

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Nov 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 21, 2019

15 of 15

Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Dec 02, 2019 – Dec 06, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 28, 2019

16 of 17

Register
Government Contracting, RCA, RCM, and ENCON
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to government contracting, reliability centered maintenance, root cause analysis, and MSC’s energy conservation policies and practices.  The subject matter is considered intermediate in nature.  This course consists of the following modules:

  • Contracting Fundamentals
  • Key Contracting Roles and Responsibilities
  • Types of Government Contracts
  • Government Contracting Regulations
  • Government Contracting Competition Requirements
  • Government Acquisition Procedures
  • Publicizing Government Contracting Actions
  • Contract Solicitation Planning
  • Contract Solicitation Process
  • Contracting Source Selection Process
  • MSC N10 Procurement Request Package Requirements
  • Reliability Centered Maintenance (RCM)
  • Root Cause Analysis (RCA)
  • MSC Energy Conservation (ENCON) Program

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Government Contracting, RCA, RCM, and ENCON Rev 1.1

Dec 03, 2019 – Dec 05, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 02, 2019

20 of 20

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Dec 16, 2019 – Dec 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 12, 2019

16 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Dec 18, 2019 – Dec 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 12, 2019

16 of 16

Register
OSHA 10 Hour Shipyard Safety and Confined Space Entry Awareness
Emprise Corporation – Chesapeake Office

Presented by Zack Academy
The OSHA Outreach Training Program for the Maritime Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the maritime industry. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards. Through this training, OSHA helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to our nation’s productivity.
Confined Space Awareness Training is designed to provide employees with the understanding, knowledge, and skills necessary for the safe performance of duties. Employees must be trained when first assigned to duties in and around permit spaces; before there is a change in assigned duties; whenever there is a change in operations that presents a hazard; and whenever the permit-space entry procedures change. Certification of such training must be available for inspection by employees or their authorized representatives.

Jan 07, 2020 – Jan 08, 2020
8:00 AM - 3:30 PM

14 of 15

Register
Maintenance Availability Planning and Management, Drydocking, and Logistics
Emprise Corporation – Chesapeake Office
Syllabus

Maintenance Availability Planning and Management, Drydocking, and Logistics Rev 0.0

This course provides an in-depth introduction to MSC maintenance availability planning and management policies and practices, MSC configuration management policies and practices, MSC logistics programs, MSC drydocking policies and practices, nondestructive testing for ship repair, and DOD scrap and salvage policies and procedures.  This course consists of the following modules:

 

  • MSC Availability Planning
  • MSC Availability Management
  • MSC Configuration Management
  • MSC Corrective Maintenance Logistics System (CMLS)
  • ShipCLIP
  • LogiQuest
  • Nondestructive Testing
  • Scrap and Salvage
  • Drydocking
  • Weight Control and Ship’s Stability

The target audience for this course is new-hire Principal Port Engineers and Assistant Port Engineers.  This course is also appropriate for other new-hire N7 personnel, as well as experienced N7 personnel who want to attain proficiency, or refresh their proficiency in certain subject matter areas.

 

Jan 07, 2020 – Jan 09, 2020
8:00 AM - 5:00 PM
Registration Deadline: Jan 06, 2020

19 of 20

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Jan 10, 2020
8:00 AM - 5:00 PM
Registration Deadline: Jan 02, 2020

14 of 15

Register

Course Date(s) Open Seats Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Sep 09, 2019 – Sep 13, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 05, 2019

14 of 16

Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Oct 07, 2019 – Oct 11, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 03, 2019

16 of 16

Register
CMEO Afloat SAMM Training – Junior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Junior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course (User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

    1. RCA (Root Cause Analysis)
    2. Reliability Centered Maintenance (RCM)
    3. Intro to SAMM
    4. SAMM VTL & Training
    5. SAMM Planned Maintenance (PM)
    6. SAMM Workbook
    7. SAMM Vibration Monitoring (VMS)
    8. SAMM Reciprocating Analysis (RA)
    9. SAMM Corrective Maintenance
    10. SAMM Machinery History
    11. Logbook
    12. Shipboard Configuration and Logistics Information Program (ShipCLIP)
    13. LogiQuest – MSC New Spare Parts research program
    14. Energy Conservation (ENCON)
    15. Machinery Alignment
    16. RITEMOV/VSA
    17. Lube Oil Theory Sampling & Testing
    18. Chemical Testing & Treatment

Syllabus CMEO for Junior Engineers

Nov 04, 2019 – Nov 08, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 01, 2019

16 of 16

Register

Course Date(s) Open Seats Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Sep 30, 2019 – Oct 04, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 26, 2019

12 of 17

Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Oct 28, 2019 – Nov 01, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 24, 2019

17 of 17

Register
CMEO Afloat SAMM Training – Senior Engineer
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Senior Engineer the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

Duration: 5-day course(User MUST attend each day to receive the certificate for the SAMM Application Training)

Course Details:

  1. RCA (Root Cause Analysis)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM
  4. SAMM Virtual Tech Library (VTL)
  5. SAMM Utilities
  6. SAMM Planned Maintenance (PM)
  7. SAMM Workbook
  8. SAMM Vibration Analysis (VMS)
  9. SAMM Reciprocating Analysis (RA)
  10. SAMM Corrective Maintenance
  11. SAMM Machinery History
  12. Logbook
  13. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  14. LogiQuest – MSC New Spare Parts research program
  15. Fuel Oil/Lube Oil Contract & Analysis
  16. Commodities/ Chemical Contracts
  17. RITEMOV/VSA
  18. AVCERT
  19. Energy Conservation (ENCON)
  20. Machinery Alignment

Syllabus CMEO for Senior Engineers

Dec 02, 2019 – Dec 06, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 28, 2019

16 of 17

Register

Course Date(s) Open Seats Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Sep 03, 2019 – Sep 06, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 29, 2019

12 of 16

Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Oct 15, 2019 – Oct 18, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 10, 2019

11 of 16

Register
CMEO Afloat Training – Deck
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Prerequisites: Course is designed to provide the Deck Officers the Day to Day computer system and program operations on an MSC vessel. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting.

4-day course – NOTE: user MUST attend each day to receive the certificate for the SAMM Application Training

  1. Root Cause Analysis (RCA)
  2. Reliability Centered Maintenance (RCM)
  3. Intro to SAMM/VTL
  4. SAMM Overview (w/Assessment)
  5. Shipslog (w/ Assessment)
  6. Energy Conservation (ENCON)
  7. CargoMax
  8. Shipboard Configuration and Logistics Information Program (ShipCLIP)
  9. LogiQuest – MSC New Spare Parts research program
  10. Drydocking
  11. Commodities (Paint/Lube/Fuel/ABS)
  12. AVCERT
  13. RITEMOV/VSA
  14. Ship Inspection Regulatory Bodies

Syllabus CMEO for Deck Officers

Nov 12, 2019 – Nov 15, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 07, 2019

9 of 16

Register

Course Date(s) Open Seats Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Aug 26, 2019 – Aug 27, 2019
8:00 AM - 5:00 PM

0 of 16

Course Full


Wait List
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Aug 28, 2019 – Aug 29, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 22, 2019

5 of 16

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Sep 16, 2019 – Sep 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 12, 2019

13 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Sep 18, 2019 – Sep 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 12, 2019

14 of 16

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Oct 21, 2019 – Oct 22, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 17, 2019

15 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Oct 23, 2019 – Oct 24, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 17, 2019

15 of 16

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Nov 18, 2019 – Nov 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 14, 2019

16 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Nov 20, 2019 – Nov 21, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 14, 2019

16 of 16

Register
CMEO Ashore Training – Part I SAMM Planning
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training.

Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part I Planning

Training Objectives: CLICK HERE TO VIEW VTL QRGs

SAMM Ashore Training – Part I Planning Topics may include:

  1. SAMM Policies Matrix
  2. SAMM Introduction
  3. AVCERT
  4. SAMM Transalt-PM
  5. SAMM Task Manager
  6. SAMM Availabilities – Part I
  7. SAMM Transalts (T-ALT Ship)
  8. SAMM Planned Maintenance Industrial Assist (PMIA)
  9. SAMM Voyage Repair Request (VRR)
  10. Work Item Historical
  11. SAMM Availabilities – Part II

Syllabus CMEO Ashore Part I

Dec 16, 2019 – Dec 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 12, 2019

16 of 16

Register
CMEO Ashore Training – Part II PENG Execution
Emprise Corporation – Chesapeake Office
Syllabus

NOTE: This training will meet/exceed the Contractor Operator requirements for SAMM Application Training. Target Audience: Course is designed to provide the Port Engineer, Assistant Port Engineer, Ashore Analysts, & N10 Contracting personnel who have a need for a basic understanding of SAMM Ashore Engineering Modules. User should be familiar with MSC policies and practices, this lesson assumes basic understanding prior to starting. 2-day course for CMEO Ashore Training – Part II Execution

Duration: (2 Days)

Training Objectives: CLICK HERE TO VIEW VTL QRGs

PENG Ashore Training – Part II Execution Topics may include:

  1. Port Engineer Vessel Inspection/PEVI
  2. PENG
  3. Completions (TALT, PMIA, and VRR)

Syllabus CMEO Ashore Part II

Dec 18, 2019 – Dec 19, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 12, 2019

16 of 16

Register

Course Date(s) Open Seats Register
Writing Performance Work Item Workshop   
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Aug 20, 2019
8:00 AM - 3:00 PM
Registration Deadline: Aug 15, 2019

10 of 15

Use Wait List


Wait List
Contract Award Based on Best Value
Emprise Corporation – Chesapeake Office

This 2-day course shows attendees how to use the tradeoff method to select the best value offer for award. Course sections include: Intro to Best Value Source Selection; Acquisition Planning, Selecting Evaluation Factors, Evaluating Technical and Cost Proposals, Exchanges Other than Discussions, Establishing the Competitive Range and Holding Discussions, Selecting a Contractor for Award, Notifications and Debriefings, and Protests. The tradeoff approach, one of the most flexible—yet most complex—source selection approaches, is designed to yield a best value acquisition. However, many members of the acquisition community aren’t sure when and how to appropriately use this approach. You will practice the strategy of achieving best value in negotiated procurements using the tradeoff process by analyzing source selection cases and applying your learning to real-world scenarios that will make your next acquisition a success.

 

This course is designed for members of an acquisition team who expect to participate in a tradeoff source selection.

 

Aug 20, 2019 – Aug 21, 2019
8:00 AM - 5:00 PM

0 of 14

Course Full


Wait List
Estimating Work Item Workshop
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Estimating Fundamentals

 

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Aug 21, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 15, 2019

13 of 15

Use Wait List


Wait List
PLC’s
Emprise Corporation – Chesapeake Office

Covers basic knowledge of PLC ladder logic and safe work procedures, as it pertains to reliability of maintenance procedures that minimized downtime while troubleshooting, and the ability to edit existing programs.

 

Aug 27, 2019 – Aug 29, 2019
8:00 AM - 5:00 PM
Registration Deadline: Aug 27, 2019

3 of 10

Register
Government Contracting, RCA, RCM, and ENCON
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to government contracting, reliability centered maintenance, root cause analysis, and MSC’s energy conservation policies and practices.  The subject matter is considered intermediate in nature.  This course consists of the following modules:

  • Contracting Fundamentals
  • Key Contracting Roles and Responsibilities
  • Types of Government Contracts
  • Government Contracting Regulations
  • Government Contracting Competition Requirements
  • Government Acquisition Procedures
  • Publicizing Government Contracting Actions
  • Contract Solicitation Planning
  • Contract Solicitation Process
  • Contracting Source Selection Process
  • MSC N10 Procurement Request Package Requirements
  • Reliability Centered Maintenance (RCM)
  • Root Cause Analysis (RCA)
  • MSC Energy Conservation (ENCON) Program

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Government Contracting, RCA, RCM, and ENCON Rev 1.1

Sep 03, 2019 – Sep 05, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 03, 2019

18 of 20

Register
OSHA 10 Hour Shipyard Safety and Confined Space Entry Awareness
Emprise Corporation – Chesapeake Office

Presented by Zack Academy
The OSHA Outreach Training Program for the Maritime Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the maritime industry. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards. Through this training, OSHA helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to our nation’s productivity.
Confined Space Awareness Training is designed to provide employees with the understanding, knowledge, and skills necessary for the safe performance of duties. Employees must be trained when first assigned to duties in and around permit spaces; before there is a change in assigned duties; whenever there is a change in operations that presents a hazard; and whenever the permit-space entry procedures change. Certification of such training must be available for inspection by employees or their authorized representatives.

Sep 10, 2019 – Sep 11, 2019
8:00 AM - 3:30 PM

9 of 15

Register
Wartsila – Water Jets Operation and Maintenance
Emprise Corporation – Chesapeake Office

This 2-day course focuses on Wartsila Jet Drives installed on ships such as the EPF class vessels. The training ensures competencies and skills are maintained by engineers interested in learning more about the operation and maintenance of Jet Drive Propulsion systems.

 

Sep 18, 2019 – Sep 19, 2019
8:00 AM - 5:00 PM

0 of 10

Course Full


Wait List
Maintenance Availability Planning and Management, Drydocking, and Logistics
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to MSC maintenance availability planning and management policies and practices, MSC configuration management policies and practices, MSC logistics programs, MSC drydocking policies and practices, nondestructive testing for ship repair, and DOD scrap and salvage policies and procedures.  This course consists of the following modules:

  • MSC Availability Planning
  • MSC Availability Management
  • MSC Configuration Management
  • MSC Corrective Maintenance Logistics System (CMLS)
  • ShipCLIP
  • LogiQuest
  • Nondestructive Testing
  • Scrap and Salvage
  • Drydocking
  • Weight Control and Ship’s Stability

The target audience for this course is new-hire Principal Port Engineers and Assistant Port Engineers.  This course is also appropriate for other new-hire N7 personnel, as well as experienced N7 personnel who want to attain proficiency, or refresh their proficiency in certain subject matter areas.

Maintenance Availability Planning and Management, Drydocking, and Logistics Rev 0.0

Sep 24, 2019 – Sep 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 23, 2019

20 of 20

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Sep 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 19, 2019

15 of 15

Register
Wartsila – Shaft Seals Operation and Maintenance
Wartsila Defense

 

This 1-day course will result in improvements to maintenance plans; ability to accomplish maintenance; and utilization of the results of maintenance. Tailored to Military Sealift Command (MSC) and oriented to MSC’s Maintenance Management, the course will focus on seals used in the MSC Fleet. The course objective is to provide technical information to MSC engineers that lead to improvements to MSC’s shaft seal maintenance.

 

Sep 27, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 19, 2019

5 of 20

Register
Work Item Writing Fundamentals
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Oct 01, 2019 – Oct 03, 2019
8:00 AM - 5:00 PM
Registration Deadline: Sep 26, 2019

15 of 15

Register
Work Item Estimating Fundamentals
Emprise Corporation – Chesapeake Office

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Oct 08, 2019 – Oct 10, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 03, 2019

13 of 15

Register
Strictly Business: The Dale Carnegie Immersion Workshop – Infotech
InfoTech

This unique three-day critical thinking and problem solving seminar will help you master the skills you need to excel in today’s competitive workplace. You’ll learn to handle people more professionally and keep pace with fast-changing workplace conditions. After you complete our critical thinking training you’ll be equipped to perform as a persuasive communicator, creative workplace problem solver and intelligent risk-taker. The program emphasizes the principles of success and shows you how to put them into action every day.

Oct 08, 2019 – Oct 10, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 08, 2019

5 of 12

Register
Introduction to Military Sealift Command
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to Military Sealift Command (MSC) and its commercial-like ship operation and maintenance philosophy, policies, and business practices.  The subject matter is considered basic in nature.  This course consists of the following modules:

  • MSC Overview
  • MSC Fleet
  • MSC Shoreside Organization
  • MSC Afloat Organization
  • MSC Engineering Directorate
  • MSC Technical Authority
  • MSC Portal
  • MSC Virtual Technical Library
  • MSC Ship Operation and Maintenance Philosophy
  • MSC Life Cycle Management
  • MSC RITEMOV Overview
  • MSC Safety Management System
  • MSC Quality Management System
  • MSC TRANSALT Management
  • MSC Commodities Contracts
  • Underway Replenishment Overview

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Introduction to Military Sealift Command Syllabus Rev 1.1

Oct 15, 2019 – Oct 17, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 15, 2019

19 of 20

Register
Caterpillar – Diesel Engine Applied Failure Analysis
Emprise Corporation – Chesapeake Office

This is a course on Applied Failure Analysis on how components fail and how to conduct failure analysis.
This objective is to provide students information that will allow them to conduct failure analysis to allow identification of “road signs” for different types of failures and their root causes.  Upon completion of the course, the student should be able to complete failure analysis determination and reports, particularly in warranty/ policy settlements, on a broad range of components.
Day1: Failure Analysis Management, basic metallurgy, fractures, wear, and visual examination and reporting
Day2: Engine bearings and crankshafts, with practical exercises on both.
Day3: Engine valves, pistons, rings, liners and fasteners, with practical exercises.
Day4: Con rods and turbochargers, with practical application on both.
Day5: Two case studies allowing students to apply skills and knowledge learned in class, analyzing multiple failed components and completing failure analysis report documentation.

Oct 28, 2019 – Nov 01, 2019
8:00 AM - 5:00 PM
Registration Deadline: Oct 24, 2019

13 of 20

Register
COR Training Certification
Emprise Corporation – Chesapeake Office

This 5-day course provides a concrete understanding of contracting principles that can yield numerous benefits, even for non-contracting personnel. It builds a strong foundation for future contracting work through an introduction to the Federal acquisition process by providing extensive and relevant simulations. With an emphasis on ethics training and the roles, responsibilities, and competencies of CORs and other personnel, students will gain the knowledge to achieve success. This course meets the FAC-COR Program training requirements for Level II certification and is equivalent to DAU’s COR 222; students will receive a COR CLC22 Certificate upon successful completion (80%) of a proctored 40-question test.

 

Nov 04, 2019 – Nov 08, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 01, 2019

3 of 14

Register
MSC Regulatory Standards, Inspections, Maintenance Availability Overview, and Engineering Budgets
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to the commercial regulatory standards, inspection regimens, aviation certification, drydocking, availability planning, availability management, work item development, and work item cost estimating philosophy, policies, and business practices used by MSC.  The subject matter is considered basic in nature.  This course consists of the following modules:

  • American Bureau of Shipping Vessel Classification
  • U.S. Coast Guard Vessel Inspection and Certification
  • MSC SMART Inspections
  • MSC Onboard Condition Inspections
  • MSC Work Item Development Overview
  • MSC Work Item Cost Estimating Overview
  • Drydocking Overview
  • Government Contracting Overview
  • MSC Availability Planning Overview
  • MSC Availability Management Overview
  • Federal Budget Process
  • DOD Budget Process
  • Funding MSC Operations
  • MSC Engineering Budget Development
  • MSC Engineering Budget Execution

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

MSC Reg Stds, Insp, Maint Avail, and Engrg Budgets Syllabus

 

Nov 12, 2019 – Nov 14, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 12, 2019

19 of 20

Register
Writing Performance Work Item Workshop
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Writing Fundamentals

 

This course provides in-depth training on MSC policies and practices pertaining to researching, writing, and editing detailed and performance-like work items, followed by practical exercises in work item review, editing, and creation. This course consists of the following modules:

  • • MSC Work Item Development Fundamentals
  • • Review and Editing of Existing Work Items
  • • Writing Detailed and Performance-like Work Items

 

Nov 13, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 07, 2019

15 of 15

Register
Estimating Work Item Workshop     
Emprise Corporation – Chesapeake Office
Syllabus

Syllabus – Work Item Estimating Fundamentals

 

This course provides in-depth training on MSC estimating policies and practices pertaining to researching, decomposing, and estimating detailed and performance-like work items, followed by practical exercises in the decomposition and estimating of new and existing detailed and performance-like work items. This course consists of the following modules:

  • • Work Item Estimating Fundamentals
  • • Decomposition and Estimating of Exercises
  • • Creating Bottom-up Estimates for Detailed and Performance-like Work Items

 

Nov 14, 2019
12:00 AM - 12:00 AM
Registration Deadline: Nov 07, 2019

15 of 15

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Nov 26, 2019
8:00 AM - 5:00 PM
Registration Deadline: Nov 21, 2019

15 of 15

Register
Government Contracting, RCA, RCM, and ENCON
Emprise Corporation – Chesapeake Office
Syllabus

This course provides an in-depth introduction to government contracting, reliability centered maintenance, root cause analysis, and MSC’s energy conservation policies and practices.  The subject matter is considered intermediate in nature.  This course consists of the following modules:

  • Contracting Fundamentals
  • Key Contracting Roles and Responsibilities
  • Types of Government Contracts
  • Government Contracting Regulations
  • Government Contracting Competition Requirements
  • Government Acquisition Procedures
  • Publicizing Government Contracting Actions
  • Contract Solicitation Planning
  • Contract Solicitation Process
  • Contracting Source Selection Process
  • MSC N10 Procurement Request Package Requirements
  • Reliability Centered Maintenance (RCM)
  • Root Cause Analysis (RCA)
  • MSC Energy Conservation (ENCON) Program

The target audience for this course is all new-hire N7 personnel.  This course is also appropriate for experienced N7 personnel who want to refresh their proficiency in certain subject matter areas.

Government Contracting, RCA, RCM, and ENCON Rev 1.1

Dec 03, 2019 – Dec 05, 2019
8:00 AM - 5:00 PM
Registration Deadline: Dec 02, 2019

20 of 20

Register
OSHA 10 Hour Shipyard Safety and Confined Space Entry Awareness
Emprise Corporation – Chesapeake Office

Presented by Zack Academy
The OSHA Outreach Training Program for the Maritime Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces in the maritime industry. The program also provides information regarding workers’ rights, employer responsibilities, and how to file a complaint. The 10-hour class is intended to provide workers with awareness of common job-related safety and health hazards. Through this training, OSHA helps to ensure that workers are more knowledgeable about workplace hazards and their rights, and contribute to our nation’s productivity.
Confined Space Awareness Training is designed to provide employees with the understanding, knowledge, and skills necessary for the safe performance of duties. Employees must be trained when first assigned to duties in and around permit spaces; before there is a change in assigned duties; whenever there is a change in operations that presents a hazard; and whenever the permit-space entry procedures change. Certification of such training must be available for inspection by employees or their authorized representatives.

Jan 07, 2020 – Jan 08, 2020
8:00 AM - 3:30 PM

14 of 15

Register
Maintenance Availability Planning and Management, Drydocking, and Logistics
Emprise Corporation – Chesapeake Office
Syllabus

Maintenance Availability Planning and Management, Drydocking, and Logistics Rev 0.0

This course provides an in-depth introduction to MSC maintenance availability planning and management policies and practices, MSC configuration management policies and practices, MSC logistics programs, MSC drydocking policies and practices, nondestructive testing for ship repair, and DOD scrap and salvage policies and procedures.  This course consists of the following modules:

 

  • MSC Availability Planning
  • MSC Availability Management
  • MSC Configuration Management
  • MSC Corrective Maintenance Logistics System (CMLS)
  • ShipCLIP
  • LogiQuest
  • Nondestructive Testing
  • Scrap and Salvage
  • Drydocking
  • Weight Control and Ship’s Stability

The target audience for this course is new-hire Principal Port Engineers and Assistant Port Engineers.  This course is also appropriate for other new-hire N7 personnel, as well as experienced N7 personnel who want to attain proficiency, or refresh their proficiency in certain subject matter areas.

 

Jan 07, 2020 – Jan 09, 2020
8:00 AM - 5:00 PM
Registration Deadline: Jan 06, 2020

19 of 20

Register
RCM/RCA Workshop
Emprise Corporation – Chesapeake Office

This 1-day course covers Reliability Centered Maintenance and Root Cause Analysis, especially as it pertains to MSC Operations, maintenance, repairs, VRRs/CASREPs, and how to apply these methodologies for preventative maintenance reviews, machinery failures, and accident investigations.

 

Jan 10, 2020
8:00 AM - 5:00 PM
Registration Deadline: Jan 02, 2020

14 of 15

Register

Course Overview

CMEO Afloat

The CMEO Deck, Senior Engineer (CE/1AE), and Junior Engineer courses provide training on an array of topics such as:

 

  • MSC Maintenance Philosophy
  • Reliability Centered Maintenance (RCM) and Root Cause Analysis (RCA)
  • Shipboard Automated Maintenance Management (SAMM)system
  • Fleet Lube Oil program
  • Fleet Fuel Oil (Policy, Testing/Analysis/Treatment, NEURS)
  • Energy Conservation (ENCON)
  • Vibration monitoring and Analysis (VMS:ViPre)
  • Reciprocating Engine Analysis (REA:DOCTOR)
  • Supply (ShipClip/LogiQuest)
  • Chemicals Program (Testing/Analysis/Treatment)
  • Equipment Alignment
  • CargoMax
  • Drydocking
  • Aviation Certification (AVCERT)

 

 

CMEO Ashore

The CMEO Ashore courses provide training for Port Engineers and N7 Technical Personnel on various topics such as:

 

  • SAMM Policies Matrix/Dashboards/Virtual Technical Library (VTL)
  • SAMM Availabilities
  • SAMM Machinery History and PM Compliance
  • SAMM PMIA (PM Industrial Assist)
  • SAMM Task Manager
  • SAMM TRANSALT (PM/Ship)
  • Training Module
  • Vessel Assessment and Inspection (VSA/PEVI)
  • Work Item (Historical and Library Module)
  • Aviation Certification (AVCERT)
  • PENG
  • ENCON
  • Reliability Centered Maintenance (RCM) and Root Cause Analysis (RCA)
  • Metrics and Reporting
  • Ship Inspection and Regulatory Bodies

 

N7 Continuing Education

N7 courses are tailored to the specific technical, operational, and administrative needs within N7, such as:

 

  • Failure Mode Identification
  • Diesel Engine Theory
  • Wartsila Shaft Seals
  • Wartsila Water Jet Drives
  • OSHA 10-Hour Shipyard Safety and Confined Space Entry
  • Dale Carnegie Management
  • Drydocking
  • Contract Officer’s Representative certification
  • Contract Award Based on Best Value
  • Programmable Logic Controllers (PLCs)
  • NACE Marine Coating Technologies (MCT)
  • NACE Shipboard Corrosion Assessment Training (S-CAT)
  • Writing Performance Based Work Items
  • Work Item Estimating
  • Oracle

 

 

Bitnami